Q1: Does the flashlight automatically bring its brightness back up after removing the obstruction when the brightness is reduced?

A1: No.

Q2: What material is the metal side switch of the flashlight made of?

A2: It is made of high-quality stainless steel, which makes it more upscale and durable.

Q3: The flashlight gets hot quickly in turbo mode. Is there a problem with it?

A3: No, the flashlight uses an internal temperature sensor to automatically control the casing temperature. It will automatically reduce the brightness to keep the casing temperature below 55 degrees celsius.

Q4: Why do we need to press harder to activate the brand new tail switch?

A4: To make it easier to distinguish between light and heavy presses.

Q5: Is the function of light-sensitive downshift protection applicable to all situations?

A5: It's not foolproof. In some cases, such as when certain matte black fur or other materials with extremely low reflectivity are blocking the light, it is possible that the brightness may not be reduced.

Q6: If the proximity sensor on the Warrior Mini 3 can not function properly, please try the following way:

Step 1. Turn off the flashlight and get it fully charged, keep connecting with the MCC charger, and make sure there is no obstruction within 2 meters of the flashlight light source (It is recommended that the flashlight outlet is facing the ceiling which is higher than 2 meters);Step 2. Press and hold the side button for 5 seconds until it accesses the Moonlight mode→Turn off→ Moonlight mode activates again. 

When the Moonlight mode has activated again, which means it accesses the fix mode, then you can release the button and triple click (or more) within 5 seconds to reconfirm the fix mode. (Please note that if you do not make any operation or incorrect operation after releasing the side button, the flashlight will exit fix mode automatically. ) The flashlight will be activated to High Mode and the brightness level will rise automatically for 15 seconds and then it turns off auto. That's the sign of fixing it successfully  ( Please do not move the flashlight during the fix process. )